BFSCL - GC-408 CLASS A-2
- MSDS: BFSCL
- Manufacturer: GOAL CHEMICAL SEALANTS CORP
- Product Name: GC-408 CLASS A-2
- National Stock Number: 8030-00-841-6832
Product Identification
Product ID:GC-408 CLASS A-2
MSDS Date:01/01/1985
FSC:8030
NIIN:00-841-6832
MSDS Number: BFSCL
Responsible Party
LOS ANGELES, CA 90023-4206
US
Emergency Phone: 213-269-0461
Info Phone: 213-269-0461
Cage: 04011
Contractor
Telephone: 213-269-0461
Cage: 04011
Ingredients
POLYSULFIDE POLYMER
Fraction By Weight: 53.7%
CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 26.8%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9192
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 13.4%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 5.68%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
STEARIC ACID
CAS: 57-11-4
RTECS: WI2800000
Fraction By Weight: 0.24%
Hazards
Effects of Overexposure:EYE,SKIN:IRRITATION;INHALE:DIZZINESS DUE TO
TOLUENE.
First Aid
First Aid:INHALE:REMOVE TO FRESH AIR;SKIN,EYES:FLUSH WITH LARGE AMOUNTS
OF WATER;INGESTION:ADMINISTER EMETIC.CALL PHYSICIAN.NOTE:WASH SKIN
AFTER EACH USE WITH SOAP AND WATER.
Fire Fighting
Flash Point:77F,25C OC
Extinguishing Media:CO*2, H*2O, ETC.
Fire Fighting Procedures:NO SPECIAL PROCEDURES
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS
Accidental Release
Spill Release Procedures:GENERAL CLEAN-UP, SCRAPE UP EXCESS MATERIAL,
CLEAN RESIDUE W/ SOLVENT
Handling
Handling and Storage Precautions:STORE BELOW 80F.
Exposure Controls
Respiratory Protection:RECOMMENDED-SOLVENT VAPORS. USE NIOSH/MSHA
APPRVD RESP DEVICE
Ventilation:MFR RECM LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:NO SPECIAL EQUIP. BESIDES ABOVE
Supplemental Safety and Health
PART A OF TWO PART PRODUCT(BASE INGREDIENTS:SYNTHETIC RUBBER);TYPE
II,CLASS A-2;UNIDENT INGRED:0.18%;DRYING TIME VARIES FROM
0.5-2HRS,BASED UPON AMT OF CATALYST ADDED;SEE DATA UNDER PN IND B.
Chemical Properties
HCC:F3
Spec Gravity:1.47
Appearance and Odor:LIGHT TO DARK GRAY WHEN MIXED; MERCAPTAN
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMP. ABOVE 300F
Hazardous Decomposition Products:SO*2,H*2S,AND OTHER SULFUR COMPOUNDS.
Disposal
Waste Disposal Methods:MFR RECM GENERAL TRASH DESPOSAL. DISPOSE IAW
FED., STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.